Spectra-precision Survey Pro v4.6 Recon-Nomad Reference Manual Instrukcja Użytkownika Strona 1

SURVEY PRO for Recon & Nomad Reference Manual © 2008 Tripod Data Systems, Inc. All Rights Reserved

Survey Pro Reference Manual R-92 Job Information Job Job Info. The Job Information screen displays details of the current job and allows you to re

Job Menu R-93 Note: Survey Pro checks for low memory situations every minute. When the available system memory falls below 256K of RAM, a warning is

Survey Pro Reference Manual R-94 π: Enters 3.141592654 to the stack. Clr: Clears the stack. √x: Square root of x. Sin-1: Arc sine of x. Cos-1: Arc co

Job Menu R-95 Manage Pictures Job Manage Pictures. The Manage Pictures screen is used to manage pictures that are associated with the current job

Survey Pro Reference Manual R-96 Take Picture Job Take Picture. The Take Picture routine is only available on a Nomad with a built-in camera. The

Job Menu R-97 The third screen is used to name and describe the picture. New Picture File Name: Enter the picture name here. The previous name enter

R-99 Job Menu – GPS Only the Settings menu item in the Job Menu is unique while running in GPS mode with the standard GPS module compared to running

Survey Pro Reference Manual R-100 Settings Job Settings. The Settings screen provides access to several individual screens that control all hardwa

Job Menu – GPS Module R-101 Create New Receiver…: opens the Receiver Setup screen where you can set the parameters for communication from data colle

R-3 Main Menu The Main Menu is the starting point where all the other Survey Pro screens described in this manual are accessed. The area at the botto

Survey Pro Reference Manual R-102 Note: Some receivers support Bluetooth wireless communication. If the data collector is set to use Bluetooth, then

Job Menu – GPS Module R-103 Rx Settings Job Settings Receiver Receiver Settings… Rx Settings or Job Settings Receiver Create New Receiver…

Survey Pro Reference Manual R-104 transfer GPS measurements in real time. This mode is used to setup both static and stop/go post processing receiver

Job Menu – GPS Module R-105 Data Modem: is where you select the type of modem. There will be several options here, depending on your brand and model

Survey Pro Reference Manual R-106 Modem is selected for the Data Modem where a new data modem configuration can be created. Edit : Opens the Cell Ph

Job Menu – GPS Module R-107 Trimble Internal Radio Pac Crest Radio Channel: is where you select the channel the radio will use to comm

Survey Pro Reference Manual R-108 Cell Phone Settings Screen The Cell Phone Settings screen is used to create or modify a cell phone data modem confi

Job Menu – GPS Module R-109 IP Modem Settings Screen The IP Modem Settings screen is used to create or modify an IP modem configuration. (You can on

Survey Pro Reference Manual R-110 Settings for Thales (Ashtech) Receivers // reference Z family documentation available at: ftp://ftp.thalesnavigat

Job Menu – GPS Module R-111 Confidence Level: is where you set the statistical criteria to use in the RTK engine’s fixed ambiguity resolution algori

Survey Pro Reference Manual R-4 Surveying Mode The instrument icon indicates which collection mode the software is running in. There are three possib

Survey Pro Reference Manual R-112 Measure Mode Settings Job Settings Measure Mode. The Measure Mode card is used to configure the RTK data colle

Job Menu – GPS Module R-113 Note: This function is not appropriate for every receiver. Some receivers, when dynamics are set to ‘static’, use Kalma

Survey Pro Reference Manual R-114 Post Process Settings Job Settings Post Process. or Connect to Receiver Receiver Settings. The Post Process c

R-115 Job Menu – Basic GPS This section describes the Settings menu item from the Job Menu for the Basic GPS Module. See Page 99 for a description o

Survey Pro Reference Manual R-116 Settings Job Settings. The Settings screen provides access to several individual screens that control all hardwa

Job Menu – Basic GPS Module R-117 Change Settings Job Settings Connections Change Settings. The Change Settings screen can be used to quickly

Survey Pro Reference Manual R-118 Bluetooth Setup Wizard Job Settings Connections Bluetooth Setup Wizard. The Bluetooth Setup Wizard uses a s

Job Menu – Basic GPS Module R-119 Radio Settings Job Settings Radio Settings. The Radio Settings card is used to configure the base radio wh

Survey Pro Reference Manual R-120 • Manage Connections : is a shortcut to the Windows’ Start > Settings > Connections > Connections screen

Job Menu – Basic GPS Module R-121 Measure Mode Job Settings Meas. Mode. See Page R-112. Post Process Job Settings Post Process. See Page R-

Main Menu R-5 Other Command Bar Buttons There are additional command bar buttons available in screens other than the Main Menu. Each is described bel

Survey Pro Reference Manual R-122 See Page R-49. Date/Time Job Settings Date/Time. See Page R-56. Buttons Job Settings Buttons. See Page R-

R-123 Survey Menu The Survey Menu contains the routines used for collecting data. A: Backsight Setup B: Traverse / Sideshot C: Repetition Shots D:

Survey Pro Reference Manual R-124 Backsight Setup Survey Backsight Setup. The Backsight Setup screen allows you to define your backsight prior to

Survey Menu R-125 Current BS Direction: displays the azimuth of the current backsight. Remote… : When connected to a robotic total station, this op

Survey Pro Reference Manual R-126 Set Backsight Circle: Once the circle value of the instrument has been set or read, the symbol will be replaced wi

Survey Menu R-127 By Angle : When the backsight is defined by a direction, this routine will read the current horizontal angle from the total statio

Survey Pro Reference Manual R-128 Check by Distance Results Occupy: is the current occupy point. Backsight: is the current backsight point. Zenith: i

Survey Menu R-129 Backsight Circle Survey Backsight Setup Circle…. The Backsight Circle dialog box is used to modify the horizontal angle read

Survey Pro Reference Manual R-130 Traverse / Sideshot Survey Traverse / Sideshot. The Traverse / Sideshot screen is the main screen used for data

Survey Menu R-131 Describe Point An additional screen will open to further describe the point depending on the options selected in the Surveying Sett

Survey Pro Reference Manual R-132 Horz Dist: is the horizontal distance from the Occupy Point to the Foresight Point. Vert Dist: is the vertical dist

Survey Menu R-133 New Occupy Point After traversing to a new point, the New Occupy Point dialog box will open that informs you of the points that hav

Survey Pro Reference Manual R-134 Point Exists Survey Traverse / Sideshot Traverse or Side Shot. When performing a traverse or side shot a

Survey Menu R-135 Remote Shot (Remote Mode) Survey Traverse / Sideshot Traverse or Side Shot. When running in remote mode, tapping the Tra

Survey Pro Reference Manual R-136 Repetition Shots Survey Repetition Shots. The Repetition Shots screen is used to perform side shots or traverse

Survey Menu R-137 HA , ZA , SD : allows you to replace the current repetition data for the corresponding button with new data. Once tapped, the re

Survey Pro Reference Manual R-138 Multiple Sideshots Survey Multiple Sideshots. The Multiple Sideshots screen is used to perform multiple side sh

Survey Menu R-139 Radial Sideshots Survey Radial Sideshots. The Radial Sideshots routine combines the functionality of the Multiple Sideshots rou

Survey Pro Reference Manual R-140 Distance Offset Survey Distance Offset. The Distance Offset screen is used to store a new point that is a known

Survey Menu R-141 Horizontal Angle Offset Survey Horizontal Angle Offset. The Horizontal Angle Offset screen allows you to compute and store the

R-7 File Menu The File Menu contains routines to transfer files between the data collector and another device. A: Open / New B: Save As C: Import D

Survey Pro Reference Manual R-142 Vertical Angle Offset Survey Vertical Angle Offset. The Vertical Angle Offset screen allows you to compute and

Survey Menu R-143 Auto Collect Survey Auto Collect. The Auto Collect screen allows users with robotic total stations to automatically collect poi

Survey Pro Reference Manual R-144 Auto Collect – Screen Two The second Auto Collect screen displays information related to the points that have been

Survey Menu R-145 Corner & 2 Lines Survey Corner & 2 Lines. The Corner and 2 Lines screen is used to store a point at the corner of a str

Survey Pro Reference Manual R-146 Corner & Angle Survey Corner & Angle. The Corner and Angle screen is used to store a point that cannot

Survey Menu R-147 Corner & Offset Survey Corner & Offset. The Corner and Offset screen is used to store a point using a reflectorless tot

Survey Pro Reference Manual R-148 Note: After each shot is complete, the computed elevation is displayed for the new point. You can either enter a d

Survey Menu R-149 Backsight : accesses the Backsight Setup screen (Page R-124) where the current backsight can be modified. Surface Scan Survey

Survey Pro Reference Manual R-150 Note: If any points defining your perimeter already exist, the point names can be entered in these fields without r

Survey Menu R-151 Surface Scan Statistics Survey Surface Scan Next >. The Surface Scan Statistics screen displays details about the surfac

Survey Pro Reference Manual R-8 Open / New File Open / New. The Open / New screen is used to open a recent job or create a new one. This screen a

Survey Pro Reference Manual R-152 Video Scan Survey Video Scan. This feature is only available when using a supported total station with a USB o

Survey Menu R-153 Hatching Tool: fills an existing scan frame with parallel lines to make it stand out visually. Clear Scan Frame Data: clears any

Survey Pro Reference Manual R-154 Brightness/Contrast: opens a dialog box where the brightness, contrast and white balance can be adjusted. Take Ph

Survey Menu R-155 Video Scan Settings Survey Video Scan The Video Scan Settings screen is used to configure how many points to shoot within t

Survey Pro Reference Manual R-156 Shoot From Two Ends Survey Shoot From 2 Ends. The Shoot From 2 Ends screen is used to provide more accurate ver

Survey Menu R-157 Record Mode Survey Record Mode. When running in Record Mode, all control of the total station is performed from the total stati

Survey Pro Reference Manual R-158 Resection Survey Resection. The Resection screen allows you to compute an unknown occupied position by shooting

Survey Menu R-159 Resection – Screen Two Resect Point: is the known point that you will shoot. Option: allows you to select the type of data that is

Survey Pro Reference Manual R-160 Results Resection OC N: is the computed northing of the Occupy Point. OC E: is the computed easting of the Occupy P

Survey Menu R-161 Remote Elevation Survey Remote Elevation. The Remote Elevation screen will compute the elevation for the occupy point by shooti

File Menu R-9 New Job File Open / New New…. The New Job wizard is used to create a new job. Create a New Job 1 Directory: displays the directory

Survey Pro Reference Manual R-162 Check Point Survey Check Point. The Check Point screen compares the rod location with an existing point in the

Survey Menu R-163 Solar Observation Survey Solar Observation. The Solar Observation screen is used to compute the azimuth to an arbitrary backsig

Survey Pro Reference Manual R-164 Note: Typically Left Edge of Center is selected when performing a sun shot in the northern hemisphere and Center is

Survey Menu R-165 Shots Number of sets: is the number of sets that will be taken to the celestial object. Reverse Shots ;: When checked, reverse sho

Survey Pro Reference Manual R-166 The Enter Shot Data Screen Horizontal Angle: displays the horizontal angle measured by the total station. This val

Survey Menu R-167 4. When finished, tap to complete the current observation. When all observations are complete, the Results page displays the comp

Survey Pro Reference Manual R-168 Remote Control Survey Remote Control. Remote control mode is a special mode that makes it easier for users to c

Survey Menu R-169 Stop : stops the total station from tracking or searching. Turn To : opens the Turn To screen (below) where the total station can

Survey Pro Reference Manual R-170 • Sky Plot: opens the Sky Plot screen. (Page R-175) • Settings: opens the GeoLock Settings screen. (Page R-176) •

Survey Menu R-171 Video Card Survey Remote Control Video. This feature is only available when using a supported total station with a USB or s

Survey Pro Reference Manual R-10 Create a New Job 2 – (Imported or External Control File) This screen will only open next when a control file will be

Survey Pro Reference Manual R-172 Video Display Options Survey Remote Control Video. The Video Display Options screen is used to customize

Survey Menu R-173 Video Settings Survey Remote Control Video. Video. or Job Settings Instrument Instrument Settings…. Instrumen

Survey Pro Reference Manual R-174 Map Card Survey Remote Control Map. The Map card displays a live map showing the total station position rela

Survey Menu R-175 Foresight Card Survey Remote Control Results. The Foresight card is available only if the backsight is solved. It displays

Survey Pro Reference Manual R-176 GeoLock Settings Survey Remote Control Settings or Job Settings GeoLock. The GeoLock Settings screen i

R-177 Survey Menu – GPS The Survey Menu while running in GPS mode with the GPS module contains the routines used for RTK data collection and post pro

Survey Pro Reference Manual R-178 GPS Status Survey GPS Status. The GPS Status screen contains several index card-format screens providing real t

Survey Menu – GPS Module R-179 • Code: the receiver is calculating a code differential solution (precision is about 1 to 10 meters). • Float: the r

Survey Pro Reference Manual R-180 Cell Modem The Cell Modem card displays information about the radio communications and allows you to disconnect or

Survey Menu – GPS Module R-181 • No Data: we are receiving an unknown or a bad response to commands. • Recording: a file on the receiver or in th

File Menu R-11 Create a New Job 3 Azimuth Type: specifies if you are surveying with a North Azimuth or South Azimuth. Units for Distances: specifies

Survey Pro Reference Manual R-182 SV Used / SV Lock: See the Receiver Card, Page R-178 Elev Mask: Displays the elevation mask currently set on the G

Survey Menu – GPS Module R-183 Consult your receiver’s documentation for more information. Position The Position card displays your current position

Survey Pro Reference Manual R-184 Start GPS Survey Survey Start GPS Survey. The Start GPS Survey wizard is used to complete the setup necessary f

Survey Menu – GPS Module R-185 Choose Projection Mode The Start GPS Survey Choose Projection Mode screen is used to select a horizontal projection mo

Survey Pro Reference Manual R-186 Choose Base Setup The Start GPS Survey Choose Base Setup screen displays your three options to configure the RTK b

Survey Menu – GPS Module R-187 Select Geoid Model The Select Geoid Model screen is used to select a geoid model to use with your coordinate system.

Survey Pro Reference Manual R-188 Connect to Base Connect to Rover with Bluetooth Create New Receiver… : opens the

Survey Menu – GPS Module R-189 Base Setup Base Setup One – Pick Base Point The first Base Setup screen is used to pick the base point and set the ant

Survey Pro Reference Manual R-190 • Last Antenna for this receiver: is displayed when you have not yet set the base in Survey Pro. This value is th

Survey Menu – GPS Module R-191 Receiver Antenna The Receiver Antenna screen is used to define the parameters of the antenna used with the current rec

ii TRIPOD DATA SYSTEMS SOFTWARE LICENSE AGREEMENT IMPORTANT: BY OPENING THE SEALED MEDIA PACKAGE, YOU ARE AGREEING TO BE BOUND BY THE TERMS AND CONDI

Survey Pro Reference Manual R-12 Create a New Job 4 – (Imported Control File) This screen will only open when a control file is being imported.

Survey Pro Reference Manual R-192 Phase CenterRadiusSlant OffsetVertical OffsetMeasurementPointMarkerVerticalHeightSlantHeight Note: When this scree

Survey Menu – GPS Module R-193 Base Setup Two – SET This final Base Setup screen is used to SET the receiver as an RTK base using the job file point

Survey Pro Reference Manual R-194 Longitude: is where you enter the WGS84 longitude for the base point. Ellipse Height: is where you enter the WGS84

Survey Menu – GPS Module R-195 Rover Setup The Rover Setup screen is used to set the RTK rover receiver, and to configure or check the base reference

Survey Pro Reference Manual R-196 The rover receiver will monitor the data link until the base reference position arrives, then Survey Pro will check

Survey Menu – GPS Module R-197 Data Collection Survey Data Collection. The Data Collection screen is used to collect GPS measurements and store n

Survey Pro Reference Manual R-198 Feature : opens the Feature Collection screen, where various automatic and manual data collection options are avai

Survey Menu – GPS Module R-199 prompted for a new description, layer, and attribute with each point stored. Interval: is where you enter the interval

Survey Pro Reference Manual R-200 coordinate at the on line point, you will return to the Offset Shots screen where you will be prompted to pick the

Survey Menu – GPS Module R-201 Occupy Data Points Screen The Occupy Data Points screen is used to collect measurements to new points. This screen is

File Menu R-13 Finish : stores a new job file and raw data file using the specified information. (Cancel): cancels the creation of a new job and br

Survey Pro Reference Manual R-202 Control Points Survey Control Points. or Data Collection Control The Control Points screen is used to measure G

Survey Menu – GPS Module R-203 Check Control Point Screen Survey Control Points Check Point. or Data Collection Control Check Point. The Che

Survey Pro Reference Manual R-204 Occupy Control Point Screen Survey Control Points Control. or Data Collection Control Control. The Occupy

Survey Menu – GPS Module R-205 Post Processing Survey Post Processing. Post processing data collection involves two steps. First, you must open a

Survey Pro Reference Manual R-206 Static / RTK Rover Receiver Session Survey Data Collection -or- Survey Post Processing Start … >. -

Survey Menu – GPS Module R-207 Note: If you are using this screen with the RTK rover, you can only store points in the post processing log file from

Survey Pro Reference Manual R-208 End Survey : Sets the receiver to mark the end of a static point occupation, closes the file, and prompts you if y

Survey Menu – GPS Module R-209 End GPS Survey Survey End GPS Survey. The End GPS Survey screen is used to stop an active post processing Stop &am

Survey Pro Reference Manual R-210 Base Setup Survey Base Setup. The Current GPS Base screen displays the position of the current RTK base referen

Survey Menu – GPS Module R-211 Rover Setup Survey Rover Setup. The Rover Setup screen is used to set an RTK rover to begin receiving differential

Survey Pro Reference Manual R-14 Open File Open / New. Browse…. The Open screen is used to open any existing job and is required to open a job th

Survey Pro Reference Manual R-212 detail starting on Page R-212 and Mapping Plane mode on Page R-223. Projection – TDS Localization Mode The Projecti

Survey Menu – GPS Module R-213 Projection Details Survey Projection Show Details…. Save System To Database : will save the current projection r

Survey Pro Reference Manual R-214 Use Geoid: is where you choose to use a geoid model with this zone. When this box is checked, you can select a geoi

Survey Menu – GPS Module R-215 Select Database Survey Projection Reset Origin… Pick from Database. Select Database…. The Select Database sc

Survey Pro Reference Manual R-216 Select H : selects the currently highlighted point as horizontal control in the least squares solution. Select V

Survey Menu – GPS Module R-217 Solve Localization – Residuals The Solve Localization Residuals screen is used to display the residuals from the least

Survey Pro Reference Manual R-218 Horizontal Card The Horizontal card is used to manually enter the six parameters of the horizontal localization sol

Survey Menu – GPS Module R-219 Localization Calculator This sub section describes a feature available only in Ground – TDS Localization mode. The Lo

Survey Pro Reference Manual R-220 Localization Calculator – Scale Note: This function is no longer necessary with Survey Pro versions after 3.5. The

Survey Menu – GPS Module R-221 Horizontal Card The Horizontal card shows results of the horizontal localization solution. Status: displays the status

File Menu R-15 Save As File Save As. The Save As screen allows you to save a copy of the current job under a new name. The copy that is created w

Survey Pro Reference Manual R-222 Vertical Card The Vertical card shows results of the vertical localization solution. Status: displays the status of

Survey Menu – GPS Module R-223 Projection – Mapping Plane Mode The Projection screen is described below for when the horizontal projection mode is se

Survey Pro Reference Manual R-224 Select Coordinate System Survey Projection Select Zone…. The Select Coordinate System screen is used to choose

Survey Menu – GPS Module R-225 Note: Some zones in the database may not have a default datum attached. In this case, the datum control is a list bo

Survey Pro Reference Manual R-226 Key in Zone Survey Projection Select Zone… Key in Zone >. Key In Zone - Setup The Key In Zone Setup scree

Survey Menu – GPS Module R-227 • South/West Grid: is where you set the coordinates increasing positive in the south, west direction. Key In Zone - Ma

Survey Pro Reference Manual R-228 is rotated by the azimuth angle of the central meridian of the projection so that grid North lines up with geodetic

Survey Menu – GPS Module R-229 Key In Zone - Datum Translation The Key In Zone Datum Translation screen is used to enter translations when the Datum

Survey Pro Reference Manual R-230 Key In Zone - Datum from Database The Key In Zone Datum from Database screen is used to select a database datum wh

Survey Menu – GPS Module R-231 Ground Coordinates Survey Projection Mapping Plane Ground…. The Ground Coordinates screen is used to toggle betwe

Survey Pro Reference Manual R-16 Import File Import. The Import screen is used to add the points from another source into the current job or impor

Survey Pro Reference Manual R-232 Project Location: is where you enter the local point from which the ground coordinate scale factor is to be applied

Survey Menu – GPS Module R-233 Ground Coordinates - Location The Ground Coordinates Location screen is used to define the local ground coordinate of

Survey Pro Reference Manual R-234 Remote Elevation Survey Remote Elevation. The Remote Elevation screen is used to compute and store a new base p

Survey Menu – GPS Module R-235 Occupy Benchmark : opens the Occupy Control Point screen (Page R-204) where the measurement is taken by the rover on

Survey Pro Reference Manual R-236 • Key In Coordinate Next > : Opens one of two possible screens depending on the choice made for the Select a

Survey Menu – GPS Module R-237 Enter Control Coordinate – Key In The purpose of this screen is to manually input the control point coordinates. This

Survey Pro Reference Manual R-238 Single Point Results This page displays the values to be used to create the new GPS control point. New GPS Control

Survey Menu – GPS Module R-239 Multiple Point Results This screen displays the values to be used to create the new GPS control points. New GPS Contro

Survey Pro Reference Manual R-240 Receiver Information Survey Receiver Info. The Receiver Information screen is used to display the serial number

Survey Menu – GPS Module R-241 Adjust with Projection Survey Adjust with Proj.. The Adjust with Projection wizard is used in three different case

File Menu R-17 Coordinates from a variety of file types can be imported into the current job. The first Import screen is used to select from the fil

Survey Pro Reference Manual R-242 system. Points with a geodetic location will be transformed into a new plane location using the destination coordi

Survey Menu – GPS Module R-243 • Database Zone: will display controls to pick a map projection from the zone groups and zones in the database. • Da

Survey Pro Reference Manual R-244 Prompt choose points Prompt geodetic points only Adjust job with new projection: is where you choose

Survey Menu – GPS Module R-245 dimension would allow this choice to be active, then the display title will indicate which dimension the setting is fo

Survey Pro Reference Manual R-246 Projection Calculator Survey Projection Calc.. The Projection Calculator wizard is used to calculate scale fact

Survey Menu – GPS Module R-247 Projection Calculator – Rotation Convergence: displays the computed rotation from geodetic north to grid north. Rotati

Survey Pro Reference Manual R-248 Projection Calculator – Scale Mapping Plane Scale Factor: displays the computed mapping plane scale factor on the s

Survey Menu – GPS Module R-249 File Management Survey File Management. The File Management routine is used to manage post processing files on a s

Survey Pro Reference Manual R-250 Note: Downloaded files can be transferred to a PC with ActiveSync and then converted to a *.DAT file for use with T

R-251 Survey Menu – Basic GPS The Survey Menu while running in GPS mode with the Basic GPS module contains the routines used for RTK data collection

Survey Pro Reference Manual R-18 Import *.CR5 Coordinates When importing a CR5 file, you will first be prompted to select the layer where you want th

Survey Pro Reference Manual R-252 GPS Status Survey GPS Status. The GPS Status screens are described starting on Page 178. Start GPS Survey Surv

Survey Menu – Basic GPS Module R-253 Base/Rover Receiver: displays information about the status of the receiver. Measure To: specifies the location

Survey Pro Reference Manual R-254 Start Survey – More than One Matching Base Point This screen will open when the base is set up on a point that pote

Survey Menu – Basic GPS Module R-255 an existing point name when the base is set on an existing job point. GPS Backsight/Resection GPS Backsight

Survey Pro Reference Manual R-256 Occupy Control Setup The Occupy Control Setup screen is used to specify which job point with accurate NEE coordinat

Survey Menu – Basic GPS Module R-257 Solve Localization Before the Solve Localization wizard starts, the localization is computed using all the cont

Survey Pro Reference Manual R-258 • Red Stop Sign: If the localization solved, and blunders were detected that could not be clearly identified, or i

Survey Menu – Basic GPS Module R-259 Data Collection Survey Data Collection. The Data Collection screen is used to collect GPS measurements and s

Survey Pro Reference Manual R-260 Offset : opens the Offset Shots screen (Page R-199), where a point can be collected and stored at a specified offs

Survey Menu – Basic GPS Module R-261 Control Points Survey Control Points. or Data Collection Control. The Control Points screen is used to meas

File Menu R-19 ; Skip the first row: should be checked if the first line in the ASCII file contains non-coordinate information, such as a heading. N

Survey Pro Reference Manual R-262 Post Processing Survey Post Processing. Post processing data collection involves two steps. First, you must op

Survey Menu – Basic GPS Module R-263 Receiver Information Survey Receiver Info. The Receiver Information screen displays the serial number, firmw

R-265 Leveling Menu The Leveling Menu replaces the Survey Menu when running in leveling mode. It contains routines to perform a level loop or 2-peg

Survey Pro Reference Manual R-266 Select/Create Loop Leveling Select/Create Loop. The Select/Create Loop screen is used to select a loop that has

Leveling Menu R-267 New Level Loop – Screen Two Desc: is where you can enter an optional description for the new loop. < Back : returns to the pr

Survey Pro Reference Manual R-268 Level Notes Settings Leveling Level Notes The Level Notes Settings screen is used to customize what and how

Leveling Menu R-269 points are not stored in the job and therefore do not have descriptions.) Column Width: When ; Auto Resize is checked, the column

Survey Pro Reference Manual R-270 Leveling Shots Leveling Level Turn to Turning Point…. (This screen is also accessed when taking shots for any

Leveling Menu R-271 All… : allows you to shoot additional shots to the backsight and foresight. You will be prompted to shoot the number of sets in

Survey Pro Reference Manual R-20 Import LandXML Coordinates Points, alignments, polylines, and parcels can be imported from a LandXML file. The way t

Survey Pro Reference Manual R-272 Leveling Stakeout Leveling Level Stakeout >. The Leveling Stakeout screen is used to measure the elevation

Leveling Menu R-273 benchmark. Backsight Point: Lists the details for the current backsight. If this is the first observation from the current set u

Survey Pro Reference Manual R-274 Close Loop The Close Loop screen lists the notes for the current level loop and allows you to close the current loo

Leveling Menu R-275 2 Peg Shots Leveling 2 Peg Test Take Shot. The 2 Peg Shots screen is used to perform the required shots to whichever observa

Survey Pro Reference Manual R-276 Adjustment Leveling Adjustment. The Adjustment routine allows you to perform a simple arithmetic elevation error

Leveling Menu R-277 Next > : opens the Adjustment Preview screen. Adjustment – Preview Screen The second adjustment screen allows you to preview

Survey Pro Reference Manual R-278 Leveling Remote Control Leveling Remote Control. The Remote Control screen can only be accessed in leveling mode

R-279 Stakeout Menu The Stakeout Menu contains a variety of stakeout routines, including offset staking. See Page R-339 for a description of the Stak

Survey Pro Reference Manual R-280 Stake Points Stakeout Stake Points. The Stake Points screen allows you to stake a single point or a series of p

Stakeout Menu R-281 Vert Distance: is the vertical distance from the occupy point to the design point. ZE to Rod: is the zenith angle required to fa

File Menu R-21 Back : returns to the previous screen. Import : imports the specified data into the current project. A results screen will open lis

Survey Pro Reference Manual R-282 Stake Points – Screen Three Height of Rod: is the length of the rod. Design Elev: displays the current design elev

Stakeout Menu R-283 Turn Gun : (available with robotic total station) turns the total station toward the design point. < Back : returns to the s

Survey Pro Reference Manual R-284 Remote Staking Stakeout Stake Points Solve > Stake >. Performing stake out in remote mode is diffe

Stakeout Menu R-285 Stake List of Points Screen Stakeout Stake List of Points.. The Stake List of Points screen is used to stake points from a s

Survey Pro Reference Manual R-286 Note: The screens available after tapping Solve > or Next Point > are identical to Screens Two and Three in t

Stakeout Menu R-287 Stake to Line Stakeout Stake to Line.. The Stake to Line screen allows you to locate any location in relation to a predefine

Survey Pro Reference Manual R-288 Stake to Line – Screen Two The second screen is where the staking is performed. The graphic display of this screen

Stakeout Menu R-289 Cut / Fill: displays the required amount of cut or fill to bring the stake point to the elevation of the reference line at the ne

Survey Pro Reference Manual R-290 If the Use Manual Updating (Remote Control) field is checked in the Stakeout Settings screen (Page R-49), a Shot bu

Stakeout Menu R-291 Offset Staking Stakeout Offset Staking. The Offset Staking screen is used to stake the center of a road, the road edge, the c

iii Table of Contents Reference Welcome...1 Main Menu.

Survey Pro Reference Manual R-22 Compare Coordinates… : will open a dialog box showing the coordinates for the duplicate points to assist in making

Survey Pro Reference Manual R-292 Offset Staking – Screen Two The second Offset Staking screen is used to define the cross section of the road that y

Stakeout Menu R-293 Note: The specified curb or ditch height and offset will be applied to both sides of the road. < Back : returns to the previo

Survey Pro Reference Manual R-294 X-Slope (%): is the slope of the selected road section. 1/2 Road Width: displays the width of the selected road sec

Stakeout Menu R-295 2. The Angle Right value is changed to zero to reflect the change. The instrument now needs to be turned horizontally to zero to

Survey Pro Reference Manual R-296 Change… : is used to modify the current design elevation, which will also modify the associated CUT/FILL value for

Stakeout Menu R-297 Note: This screen will not appear if the Write Cut Sheet Data Only (No Store Point) checkbox is checked in the Stakeout Setting

Survey Pro Reference Manual R-298 Slope Staking Stakeout Slope Staking. The Slope Staking screen is used to locate the catch points for a roadway

Stakeout Menu R-299 include a curb or ditch in the road profile. Height: defines the height of the curb, or depth of the ditch. (A negative value wo

Survey Pro Reference Manual R-300 Slope Staking – Screen Four The fourth screen is used to perform the actual slope staking shots. Left / Right: disp

Stakeout Menu R-301 Results : This will display the following additional cut, fill, and location information: • Type of slope (e.g. left/right, cut

File Menu R-23 Export – Screen Two The second Export screen will open for any file type that was selected in the previous screen except LandXML. Thi

Survey Pro Reference Manual R-302 • Automatic Slope : selects the slope that is nearest to the current rod position. • Force CUT Slope : forces a

Stakeout Menu R-303 Store CP : stores the point. Offset from CP: This field is used if you want to stake another location that is at the specified h

Survey Pro Reference Manual R-304 zeroed on a design point is meaningless once the design point has been staked. Note: The Circle Zero button is not

Stakeout Menu R-305 Point Slope Staking Stakeout Point Slope Staking. The Point Slope Staking routine is a simplified version of the Slope Stakin

Survey Pro Reference Manual R-306 Point Slope Staking – Screen Two The second screen is used to perform the actual point slope staking shots. Rod Ele

Stakeout Menu R-307 EDM: This button can be toggled to shoot in various EDM modes. The options available depend on the total station being used. Co

Survey Pro Reference Manual R-308 • Force CUT Slope : forces all computations to be based on a cut slope. • Force FILL Slope : forces all computa

Stakeout Menu R-309 Stake Line and Offset Stakeout Line and Offset. The Stake Line and Offset screen is used to stake stations on a line, or at a

Survey Pro Reference Manual R-310 Vertical Offset : is the offset distance that is below the design location (when D is selected) or above the desi

Stakeout Menu R-311 the instrument and stored in the raw data 2. The Angle Right value is changed to zero to reflect the change. The instrument now

Survey Pro Reference Manual R-24 Export *.CR5 Coordinates The Export CR5 dialog box will open when exporting coordinates to a TDS CR5 coordinate file

Survey Pro Reference Manual R-312 Stake Curve and Offset Stakeout Curve and offset. The Stake Curve and Offset screen is used to stake stations o

Stakeout Menu R-313 Curve and Offset – Screen Two Station to Stake: is the desired station on the curve that you want to stake. Station Interval: is

Survey Pro Reference Manual R-314 Curve and Offset – Screen Three Station: displays the current station that is being staked. H. Offset: displays the

Stakeout Menu R-315 Stake > : accesses the next screen, which is identical to the third Stake Points screen, described on Page R-282. Screen Summ

Survey Pro Reference Manual R-316 Stake Spiral and Offset Stakeout Spiral and Offset. The Stake Spiral and Offset screen allows you to stake stat

Stakeout Menu R-317 Stake Spiral and Offset – Screen Two Station to Stake: is the desired station on the spiral curve that you want to stake. Station

Survey Pro Reference Manual R-318 Stake Spiral and Offset – Screen Three Station: displays the current station that is being staked. H. Offset: displ

Stakeout Menu R-319 < Back : returns to the previous screen. Stake > : accesses the next screen, which is identical to the third Stake Points

Survey Pro Reference Manual R-320 Show Station Stakeout Show Station. The Show Station routine allows you to take a shot to a prism that is posit

Stakeout Menu R-321 Show Station – Screen Two The second Show Station screen is used to take a shot to the prism and view the data. Height of Rod: is

File Menu R-25 Export *.TXT Coordinates – Screen Two Select the desired order and format for the resulting TXT file from the list of options. Finish

Survey Pro Reference Manual R-322 Store Offset Points Stakeout Store Offset Points. The Store Offset Points screen is used to store points in the

Stakeout Menu R-323 Store Offset Points – Screen Two The second Store Offset Points screen is used to define the road profile, or offset distances th

Survey Pro Reference Manual R-324 Store Offset Points – Screen Three The third Store Offset Points screen is used to define which offset points will

Stakeout Menu R-325 Stake DTM Stakeout Stake DTM. The Stake DTM routine allows you to stake an area and get cut/fill information between the poin

Survey Pro Reference Manual R-326 Usually the difference between International Feet and US Survey Feet is negligible (2 parts per million), but when

Stakeout Menu R-327 Backsight : accesses the Backsight Setup screen (Page R-124) where the current backsight can be modified. Next > : opens the

Survey Pro Reference Manual R-328 Stake DTM – Screen Two Stakeout Stake DTM Next >. The second Stake DTM screen displays all relevant info

Stakeout Menu R-329 Note: Tapping anywhere within the map view will open a larger map view with zoom controls. Point: is the point name that will be

Survey Pro Reference Manual R-330 Station Staking Stakeout Station Staking. The Station Staking routine allows you to stake the stations, offsets

Stakeout Menu R-331 Cross-Section View Stakeout Station Staking View Cross-Sections. The Cross-Section View screen is used to view the station,

Survey Pro Reference Manual R-26 Import Control Points File Import Control. The Import Control screen is used to manage a control file for the cur

Survey Pro Reference Manual R-332 Station Staking – Screen Two Stakeout Station Staking Next >. The second Station Staking screen is used t

Stakeout Menu R-333 the instrument and stored in the raw data 2. The Angle Right value is changed to zero to reflect the change. The instrument now

Survey Pro Reference Manual R-334 Define a Location Stakeout Define a Location. The Define a Location screen is used to manually enter the distan

Stakeout Menu R-335 Define a Location – Screen Two The second Define a Location screen displays the direction and distance information from the occup

Survey Pro Reference Manual R-336 Note: The third Define a Location screen is identical to the third Stake Points screen, which is described on Page

Stakeout Menu R-337 Where is Next Point – Screen Two This screen shows two graphics that indicate the direction and distance that the rod person must

R-339 Stakeout Menu – GPS and Basic GPS The Stakeout Menu while running in GPS mode with either the GPS module or Basic GPS module contain the routin

Survey Pro Reference Manual R-340 Stake Points Stakeout Stake Points. The GPS Staking screen is used to navigate to a design point with the recei

Stakeout Menu – GPS & Basic GPS Module R-341 are near the design point, the graphic will change and the N/S indicator will stop updating to assis

File Menu R-27 snapshot have a icon. A new (empty) archive has a icon. All of the backups for a particular job are physically stored to a single

Survey Pro Reference Manual R-342 Note: The Display Directions As field in the Stakeout Settings screen configures the format for the text that dire

Stakeout Menu – GPS & Basic GPS Module R-343 to configure rover antenna and the backsight information is replaced with rover antenna height infor

Survey Pro Reference Manual R-344 the receiver. If this area of the screen is tapped, the epoch count stops and the GPS Status screen opens (Page R-1

Stakeout Menu – GPS & Basic GPS Module R-345 Slope Staking Stakeout Slope Staking. The Slope Staking screen is used to locate the catch point

Survey Pro Reference Manual R-346 precision computed by the receiver. Tap on this button to open the detailed GPS Status screen (Page R-178). The fi

Stakeout Menu – GPS & Basic GPS Module R-347 Obs. Slope: is the computed (observed) cut or fill slope based on the last shot and the correspondin

Survey Pro Reference Manual R-348 Curve and Offset Stakeout Curve and Offset. The instructions for the Curve and Offset routine for GPS are simil

Stakeout Menu – GPS & Basic GPS Module R-349 Show Station – Screen Two Once the line is selected, the second screen is opened where information i

Survey Pro Reference Manual R-350 Store Offset Points Stakeout Store Offset Points. The instructions for the Store Offset Points routine for GPS

Stakeout Menu – GPS & Basic GPS Module R-351 Note: the DTM boundary corners and TIN triangle may not be visible depending on the current scale of

Survey Pro Reference Manual R-28 Backup / Restore - Archive Properties File Backup / Restore Properties…. The Archive Properties screen lists th

Survey Pro Reference Manual R-352 C.L.: shows the current station and offset information for the rover location relative to the selected centerline.

R-353 Inverse Menu The Inverse Menu contains routines that compute the direction and distance between two objects. The following screens are availab

Survey Pro Reference Manual R-354 Inverse Point to Point Inverse Point to Point. The Inverse Point to Point screen will calculate the distance an

Inverse Menu R-355 Inverse Point to Line Inverse Point to Line. The Inverse Point to Line screen computes the perpendicular offset distance and d

Survey Pro Reference Manual R-356 North: is the Y-coordinate on the specified line, tangent to the perpendicular offset. East: is the X-coordinate on

Inverse Menu R-357 ; Store Point: When checked, will store the first solution where a perpendicular offset intersects with a polyline using the speci

Survey Pro Reference Manual R-358 Inverse Point to Multiple Points Inverse Multiple Points. The Inverse Point to Multiple Points screen will calc

Inverse Menu R-359 Inverse Point to Location / Point Inverse Location / Point. The Inverse Point to Location / Point screen will calculate the di

R-361 Cogo Menu The Cogo Menu contains all of the coordinate geometry routines used to perform computations from the existing job data. The followin

File Menu R-29 Backup / Restore – Backup When performing a backup, all the files associated with the current job are listed and will be included in t

Survey Pro Reference Manual R-362 Point in Direction Cogo Point in Direction. The Point in Direction screen will calculate and store the position

COGO Menu R-363 Intersection Cogo Intersection. The Intersection screen computes the intersection(s) of two lines given the direction(s) and/or d

Survey Pro Reference Manual R-364 Map The Map card is used to determine which intersection points were computed and are labeled with a and . You ca

COGO Menu R-365 Offset Line Cogo Offset Line. The Offset Line screen is used to view, store a polyline, or store an alignment that is at a specif

Survey Pro Reference Manual R-366 Offset Points Cogo Offset Points. The Offset Points screen is used to store points at a specified perpendicular

COGO Menu R-367 Solve : computes the offset points, and stores them if the Store Pts checkbox is checked. Station Offset Cogo Station Offset. Th

Survey Pro Reference Manual R-368 Corner Angle Cogo Corner Angle. The Corner Angle screen provides information on the horizontal angle created fr

COGO Menu R-369 Compute Area Cogo Compute Area. Allows you to compute the area of a selected boundary. Tap Line… : allows you to tap an existing

Survey Pro Reference Manual R-370 Triangle Solutions Cogo Triangle Solutions. The Triangle Solutions screen will solve for the unknown parts of a

COGO Menu R-371 Map Check Cogo Map Check. The Map Check screen is used to manually enter boundaries from a map to check for closure and other inf

Survey Pro Reference Manual R-30 Backup/Restore – Restore When restoring the job files from an archive, the archived files will replace the existing

Survey Pro Reference Manual R-372 Error azm: is the direction from the last point to the first point Precision: is the ratio between the Error distan

COGO Menu R-373 Mid Ordinate : The distance between the curve and the chord at the center of the curve’s length. External : The minimum distance be

Survey Pro Reference Manual R-374 Predetermined Area Cogo Predetermined Area. The Predetermined Area routine will take a boundary with one open s

COGO Menu R-375 Note: a boundary has two fixed sides and one side defined by a direction when using the Hinge Method. It has one fixed side and two

Survey Pro Reference Manual R-376 HD/VD to SD/ZA Cogo HD/VD to SD/ZA. The HD/VD to SD/ZA screen will convert a vertical and horizontal distance t

COGO Menu R-377 SD/ZA to HD/VD Cogo SD/ZA to HD/VD. The SD/ZA to HD/VD screen will convert a slope distance and zenith angle to an equivalent hor

Survey Pro Reference Manual R-378 AU Conversion Cogo AU Conversion. The AU (Architectural Units) Conversion screen will convert distances with f

COGO Menu R-379 Average Points Cogo Average Points. The Average Points routine will compute the average location from any number of existing poi

Survey Pro Reference Manual R-380 Average Points – Screen Two The second screen is used to view the coordinates of the average point, optionally adju

R-381 Curve Menu The Curve Menu contains routines that will compute all aspects of a horizontal curve and assist in curve layout. A: Curve Solution

File Menu R-31 Transfer File Transfer. The Transfer screen allows you to transfer files between the data collector and another device running TDS

Survey Pro Reference Manual R-382 Curve Solution Curve Curve Solution. The Curve Solution screen provides detailed information on a curve when tw

Curve Menu R-383 Results: Radius: is the distance from the radius point to the curve. Length: is the arc length. Chord: is the chord length. Deg. Arc

Survey Pro Reference Manual R-384 Known PI and Tangents Curve PI and Tangents. The PI and Tangents screen is used to compute and store the PC, PT

Curve Menu R-385 Three Point Curve Curve 3 Point Curve. The Three Point Curve screen will compute the details of a curve when three points of the

Survey Pro Reference Manual R-386 Delta: is the deflection angle. Tangent: is the distance from the PC or PT to the PI. Mid Ord.: is the distance bet

Curve Menu R-387 Compute Radius Point Curve Radius Point. The Compute Radius Point screen is used to compute and optionally store the radius poin

Survey Pro Reference Manual R-388 Results Radius: is the distance from the radius point to the curve. Length: is the arc length. Chord: is the chord

Curve Menu R-389 Line Tangent to Circles Curve Tangent to Circle. Will compute the location of a line that is tangent to the specified sides of t

Survey Pro Reference Manual R-390 Curve Layout Curve Curve Layout. The Curve Layout screen is used to assist in the layout of a horizontal curve

Curve Menu R-391 RPPTPIPCCurrentStationDeflectionPI to Station PI Deflection • PI Deflection: provides deflection angles and distances to each stat

iv Survey Menu...123 Backsight Setup...

Survey Pro Reference Manual R-32 that indicates how much of the file has been transferred. Tapping Cancel will stop the file transfer. Note: The Se

Survey Pro Reference Manual R-392 • Chord Offset: provides perpendicular offset information from the chord (the line from the PC to the PT) for each

Curve Menu R-393 • External : is the minimum distance between the PI and the curve. PC Station: is the starting station assigned to the PC. ; Inter

Survey Pro Reference Manual R-394 Traverse on Curve Curve Trav. on Curve. The Traverse on Curve screen will compute the PT and radius point for a

Curve Menu R-395 ; Store PT: When checked, will store the computed PT point with the specified point name. ; Store RP: When checked, the computed rad

Survey Pro Reference Manual R-396 Parabolic Curve Curve Parabolic Curve. The Parabolic Curve screen provides detailed information on a vertical p

Curve Menu R-397 PVC / PVI Elevation: is the elevation for the specified point. Begin Grade: is the grade at the tangent of the PVC. End Grade: is th

Survey Pro Reference Manual R-398 Parabolic Layout Curve Parabolic Layout. The Parabolic Layout screen allows you to compute an elevation at a s

Curve Menu R-399 Results PVC sta.: is the station at the PVC. PVI sta.: is the station at the PVI. PVT sta.: is the station at the PVT. elev.: is the

Survey Pro Reference Manual R-400 Straight Grade Curve Straight Grade. The Straight Grade screen will solve for the elevation at a specified stat

Curve Menu R-401 Spiral Curve Spiral. The Spiral screen will compute the details of a spiral curve, given the spiral length and radius. Spiral le

File Menu R-33 Enter Registration Code : Opens the Register screen, shown here, where the registration number for a particular module can be entered

Survey Pro Reference Manual R-402 Spiral Layout Curve Spiral. The Spiral Layout screen is used to compute station locations on a spiral curve. Ra

Curve Menu R-403 Results Station: is the current station. Deflection: is the horizontal angle to the current station as if occupying the TS and backs

Survey Pro Reference Manual R-404 Results Tangent In: the tangent direction entering the spiral at the TS or CS. Tangent Out: the tangent direction e

R-405 Roads Menu The Roads Menu contains the routines used to perform road layout. A: Edit Templates B: Edit Alignments C: Edit Roads D: Road Stakeo

Survey Pro Reference Manual R-406 Add/Edit Templates Roads Edit Templates. The Add/Edit Templates screen is used to edit an existing template or

Roads Menu R-407 Edit Template Roads Edit Templates Edit…. or Roads Edit Templates New…. The Edit Template screen is identical to the New

Survey Pro Reference Manual R-408 Remove : removes the selected segment and automatically joins the previous segments to the following segments. Not

Roads Menu R-409 Edit Alignments Roads Edit Alignments or Job Edit Alignments. The Edit Alignments screen is used to create an alignment tha

Survey Pro Reference Manual R-410 the Add/Edit Roads screen without making any changes. • Delete alignment alignment name?: Answering Yes to this pr

Roads Menu R-411 The Road Card Roads Edit Roads ( New… or Edit… ) Road. The Road card of the New Road screen is used to select the alignment t

Survey Pro Reference Manual R-412 • Confirm that all template segments have a name. (The names do not have to be unique.) • Confirm that the same n

Roads Menu R-413 Road Profiles Screen Roads Edit Roads ( New… or Edit… ) Road View Profiles…. The Road Profiles screen allows you to see inf

Survey Pro Reference Manual R-414 Road Alignment Properties Screen Roads Edit Roads ( New… or Edit… ) Road Set POB…. The Road Alignment Prop

Roads Menu R-415 Check… : checks the road for errors and displays the results in the Roads Report screen, described above. Add / Edit Template Sc

Survey Pro Reference Manual R-416 The Widenings Card Roads Edit Roads ( New… or Edit… ) Widenings. The Widenings card of the New Road screen i

Roads Menu R-417 Edit : allows you to edit the selected widening in the Edit Widening screen, which is identical to the Add Widening screen. Remove

Survey Pro Reference Manual R-418 Super Elevations Card Roads Edit Roads ( New… or Edit… ) Super Elevations. The Super Elevations card of the

Roads Menu R-419 Add / Edit Super Elevation Screen Roads Edit Roads (New… or Edit…) Super Elevations (Add… or Edit…) The Add / Edit Super Elevation

Survey Pro Reference Manual R-420 Note: One half of the parabolic transition length will extend before and after the starting point and/or the endin

Roads Menu R-421 Road Stakeout Roads Road Stakeout. The Stake Road screen is used to stake any segment of a road profile at any station. Tap R

R-35 Job Menu A: Settings B: Edit Points C: Edit Polylines D: Edit Alignments E: Auto Linework F: View Raw Data File G: View DTM H: Manage Layers I:

Survey Pro Reference Manual R-422 Stake Road – Screen Two The second Stake Road screen displays a cross-sectional profile view of the road at the cur

Roads Menu R-423 occurring below the selected node. Negative values result in the stake location occurring above the selected node. Backsight… : acc

Survey Pro Reference Manual R-424 2. The Angle Right value is changed to zero to reflect the change. The instrument now needs to be turned horizonta

Roads Menu R-425 Shot data: displays the measurements from the last shot. Change… : is used to modify the current design elevation, which will also

Survey Pro Reference Manual R-426 Stake Road – Screen Five This screen is used to describe the stake point before it is stored and select if the Resu

Roads Menu R-427 Road Slope Staking Roads Slope Staking. The Road Slope Staking screen is used to locate the catch point of the road at any stat

Survey Pro Reference Manual R-428 Road Slope Staking – Screen Two The second Road Slope Staking screen is used to set up some slope stake parameters

Roads Menu R-429 Slopes Card The Slopes card is used to specify the cut and fill slopes that will be used when computing the location of the catch po

Survey Pro Reference Manual R-430 Road Station and Offset Roads Show Station. The Road Station and Offset routine allows you to take a shot to a

Roads Menu R-431 Road Station and Offset – Screen Two The second Road Station and Offset screen is used to take a shot to the prism and view the data

Survey Pro Reference Manual R-36 Settings Job Settings. See Page R-100 if running in RTK GPS mode. The Settings screen actually consists of severa

Survey Pro Reference Manual R-432 Cross-Section Card Station: displays the station at the rod position. Template: displays the name of the template t

Roads Menu R-433 Station Equation Roads Road Stakeout Equation Settings. or Roads Slope Staking Equation Settings. or Roads Show Stati

R-435 Adjust Menu The Adjust Menu contains routines to perform a variety of adjustments. A: Scale B: Translate C: Rotate D: Traverse Adjust

Survey Pro Reference Manual R-436 Scale Adjust Scale. The Scale screen will scale the distances of a range of points relative to a specified base

Adjust Menu R-437 Translate Adjust Translate. The Translate screen will move a group a points horizontally and vertically by a specified distance

Survey Pro Reference Manual R-438 Point / Location : allows you to enter either a point name or location coordinates. Solve : adjusts the selecte

Adjust Menu R-439 Old Azimuth / Old Bearing : is a known direction between any two points in the current job before they are rotated. New Azimut

Survey Pro Reference Manual R-440 ; Adjust elevation: When selected, the elevations for the traverse points are also adjusted from the compass rule a

Adjust Menu R-441 Traverse Adjust – Angle Adjustment If an angle adjustment is being performed, this screen will appear next. Closing Angle:

Job Menu R-37 Note: When editing an existing instrument profile, you cannot modify the instrument brand or model. Create New Instrument : opens the

Survey Pro Reference Manual R-442 Traverse Adjust – Compass Rule If a compass rule adjustment is being performed, this screen will appear next. Close

Adjust Menu R-443 Traverse Adjust – Results This screen displays the changes that will be made by the adjustment, where they can be previewed before

R-445 Miscellaneous Screens The following screens are only available via a Quick Pick or a power button (see the User’s Manual). They are not availa

Survey Pro Reference Manual R-446 Past Results Past Results (where applicable) When the Past Results option is used to enter a value in a specific

Miscellaneous Screens R-447 Create Points Job Edit Alignments Create Points The Create Points screen is used to store points that coincide wi

Survey Pro Reference Manual R-448 Edit Description List (from any Description field), Edit Description List… The Edit Description List screen is use

Miscellaneous Screens R-449 Trimble Slant HR -> HR (From any HR field), Trimble Slant HR -> HR This option only applies when using a Trimble T

Survey Pro Reference Manual R-450 Quick Pick Editor , Edit Quick Pick (located at bottom of list) The Quick Pick Editor is used to customize the lis

Miscellaneous Screens R-451 Select Point(s) Tap from a variety of screens. The Select Point(s) screen is used to define a simple list of points or a

Survey Pro Reference Manual R-38 Instrument Settings – Screen Two The second Instrument Settings screen opens whenever a new instrument profile is be

Survey Pro Reference Manual R-452 Map View from the command bar, or from various screens Many screens provide access to a map view, wh

Miscellaneous Screens R-453 Zoom Out Button: will zoom the current screen out by approximately 25%. Zoom Window Button: allows you to drag a box ac

Survey Pro Reference Manual R-454 Map Display Options From the Map View, tap The Map Display Options screen is used to configure the information th

Miscellaneous Screens R-455 Manage Basemaps From the Map View, tap , Manage Basemaps. or From the Map View, tap The Manage Basemaps screen is used

Survey Pro Reference Manual R-456 Edit Basemaps From the Map View, tap Manage Basemaps Edit…. The Edit Basemaps screen is used to preview the

Miscellaneous Screens R-457 Smart Targets Tap a power button next to a (indicating a prism Smart Target is currently selected) or (indicating a

Survey Pro Reference Manual R-458 Manage Smart Targets , Manage Smart Targets The Manage Smart Targets screen is used to edit existing custom targets

Miscellaneous Screens R-459 Edit Smart Target , Manage Smart Targets, Add or Edit. The Edit Smart Target screen is used to edit an existing Smart

Survey Pro Reference Manual R-460 that is introduced when taking a shot to the prism at an extreme vertical angle. The icon is displayed to help th

Appendix A Transverse Mercator Zones Central Meridians for State Plane Coordinates E = East W = West C = Central State Zone Central Meridian

Job Menu R-39 Defaults : will set the Serial Port, Baud Rate and Parity to their default values based on the selected total station. Instrument Se

Survey Pro Reference Manual A-2 State Zone Central Meridian State Zone Central Meridian Mississippi E 88 50 W 90 20 Missouri E 9

Appendix A A-3 State Zone Central Meridian Zone Constant Arkansas N S 92 00 92 00 0.581899 0.559691 California 1 2 3 4 5 6 7 122 00 122 00 120 30 1

Survey Pro Reference Manual A-4 New York (Long Island) 74 00 0.654082 North Carolina 79 00 0.577171 North Dakota N S 100 30 100 30 0.744133 0.7

I-1 Index # 2 peg test ...R-274 procedure... 217 2D/3D points ... 47 3D view...

Survey Pro Reference Manual I-2 code edit... R-83 codes description ... 38, 39 combined scale factor121, 239 compas

Index I-3 edit road ...R-410 edit segment...R-73 EGM96 ... 232 ellipsoid height...

Survey Pro Reference Manual I-4 NAD27 ... 229 NAD83 ... 229 WGS84 ... 229 WGS84(199

Index I-5 horizontal card ...R-218 manual parameters..R-217 one point ... 293 parameters ... 288 pick from da

Survey Pro Reference Manual I-6 editing ... R-64 point in direction... R-362 point list ... 22, R-451 point s

Index I-7 road templates ...R-406 roads ...R-409 rotate ... 191, R-438 rotation...

Survey Pro Reference Manual R-40 Level Method Job Settings Instrument (select Manual Mode) Instrument Settings… The Level Method screen is used to se

Survey Pro Reference Manual I-8 road ... R-421 stakeout settings... R-49 start Basic GPS surveyR-252 start Basic GPS s

Index I-9 where is next point R-336, R-352 widenings ...R-416 Windows Networking316, 321 WW15mGH.grd... 241 Z zone cons

Job Menu R-41 Units Settings Job Settings Units. The Units Settings card defines the units that are used within the software, sent from the tota

v Adjust with Projection... 241 Projection Calculator...

Survey Pro Reference Manual R-42 the imported coordinates, the error after the conversion could be significant. Units for Angles: defines the units u

Job Menu R-43 Distances: allows you to display from zero to six places passed the decimal point for distances. Angles: allows you to include from zer

Survey Pro Reference Manual R-44 Descriptions Settings Job Settings Descriptions., or (from any Description field), Description Settings… The

Job Menu R-45 Surveying Settings Job Settings Surveying. The Surveying Settings card allows you to select various options that affect how data c

Survey Pro Reference Manual R-46 screen are used in determining when two shots are at the same location. ; Survey with True Azimuths: automates the p

Job Menu R-47 Grid Factor: is where you enter a map plane scale factor if already known, otherwise it is the scale factor computed from the Calculate

Survey Pro Reference Manual R-48 Screen Two Ellipsoid Height: The height of the ground above the ellipsoid surface. < Back : returns to the previ

Job Menu R-49 Stakeout Settings The Stakeout Settings card contains the setting that control how stakeout is performed. (The settings available depen

Survey Pro Reference Manual R-50 ; Write Cut Sheet Data Only (No Store Point): When checked, as-built points are not stored to the JOB file when stak

Job Menu R-51 screen that is displayed when you are near the stake point will occur when you are within the distance to the stake point specified her

vi Slope Staking... 345 Line and Offset...

Survey Pro Reference Manual R-52 The Level Setting screen is only available when running in leveling mode. It is used to configure all of the settin

Job Menu R-53 ; Min Ground Clearance: When checked, a warning will occur if a shot is taken at a location on the rod that is within this distance to

Survey Pro Reference Manual R-54 FGCS Defaults Job Settings Level Load FGCS Defaults. The FGCS Defaults screen is used to load the default FGC

Job Menu R-55 Repetition Settings The Repetition Settings card contains the settings that control how repetition shots are performed and acceptable t

Survey Pro Reference Manual R-56 • FS > BS ^> FS > BS: Foresight, Backsight, flop Foresight, Backsight • BS ^ BS ^ > FS ^ FS ^: Backsig

Job Menu R-57 Buttons Settings The Buttons Settings card is used to customize the function for the physical buttons located on the data collector. Th

Survey Pro Reference Manual R-58 General Settings The General Settings card can contain the following miscellaneous settings: ; Use Enter Key to Move

Job Menu R-59 ; Prompt for Description: When checked, a prompt for a description will appear before any new point is stored from any routine other th

Survey Pro Reference Manual R-60 Edit Points Job Edit Points. The Edit Points screen allows you to add, edit, and delete any points in the current

Job Menu R-61 Edit Multiple Points – General Job Edit Points Edit… General. This screen is accessed after pressing Edit… when more than one

vii Curve Layout... 390 Traverse on Curve...

Survey Pro Reference Manual R-62 Edit Point – General Job Edit Points Edit… General. The General card of the Edit Point screen is used to modi

Job Menu R-63 Point Feature Attributes Job Edit Points Edit… General Attributes…. The Point Feature Attributes screen is available from the

Survey Pro Reference Manual R-64 Edit Point – Geodetic Job Edit Points Edit… Geodetic. The Geodetic card applies primarily to Survey Pro with

Job Menu R-65 Edit Polylines Job Edit Polylines. The Edit Polylines screen is used to add, edit, and delete polylines in the current job. The firs

Survey Pro Reference Manual R-66 the current polyline can be modified. Clear : removes the current polyline. Screen Three – Polyline Editor Once the

Job Menu R-67 Note, if <End> is selected in the list, the <-Insert button will change to an <-Append button to indicate that additional p

Survey Pro Reference Manual R-68 Adding a Spiral Tap the Arc / Spiral tab. Curve: must be set to Spiral to enter a spiral curve. Radius: is the radiu

Job Menu R-69 Edit Alignments The Edit Alignments screen is used to create and edit alignments, which can then be used with routines such as Offset S

Survey Pro Reference Manual R-70 • Import .RD5 File: opens the Open screen and lists all the *.RD5 alignment files in the Jobs directory. Select th

Job Menu R-71 Edit Alignment Screen – VAL Tab The VAL (Vertical ALignment) tab in the Edit Alignment screen is used to enter or modify only the verti

viii Appendix A Transverse Mercator Zones...A-1 Lambert Zones ...

Survey Pro Reference Manual R-72 Edit Alignment Screen – POB Tab The POB (Point Of Beginning) tab in the Edit Alignment screen is used to define the

Job Menu R-73 Edit Segment The Edit Segment screen is accessed anytime an existing horizontal or vertical segment is added or edited. A variety of s

Survey Pro Reference Manual R-74 Edit Segment – Arc (Horizontal Curve) Card The Arc card is used to add a horizontal curve to the alignment. The curv

Job Menu R-75 Edit Segment – Spiral Card The Spiral card is used to add a spiral curve to the alignment. Radius: is the radius of the spiral. (This

Survey Pro Reference Manual R-76 Edit Segment – Vertical Grade Card The Vertical Grade card is used to enter a segment with any grade. Length: is the

Job Menu R-77 Auto Linework Job Auto Linework The Auto Linework screen is used to set up custom descriptors that can be used to generate various

Survey Pro Reference Manual R-78 “LOT10” would be connected. If LOT15 were also used as a description during data collection, any future use of LOT1

Job Menu R-79 • T-Crv : creates a curve with a specified incoming tangent from the next two points that are stored with a description associated wi

Survey Pro Reference Manual R-80 selected, future points stored with this linework command will be appended to the selected polyline. Props: A single

Job Menu R-81 View Raw Data File Job View Raw Data. The View Raw Data File screen displays the raw data file of the current job and allows you to

R-1 Welcome Congratulations on your decision to purchase a Tripod Data Systems product. TDS is serious about providing the best possible products to

Survey Pro Reference Manual R-82 Raw Data Note Job View Raw Data Note…. The Raw Data Note screen is used to append a note to the raw data file.

Job Menu R-83 History Page The History page provides a quick way to enter a note that was used earlier. The page lists up to the last 30 notes used.

Survey Pro Reference Manual R-84 Note: Custom code buttons remain intact even when switching or creating new jobs because the details of these button

Job Menu R-85 3D View… : will open the 3D View screen where the DTM can be viewed from any angle. Layers for Staking DTM Job View DTM Layers….

Survey Pro Reference Manual R-86 Choose Polyline Job View DTM Boundary…. The Choose Polyline screen is used to select an existing polyline that

Job Menu R-87 Note: If a boundary is defined, only polylines that fall within the boundary can be added. New… : opens the New Polyline screen, which

Survey Pro Reference Manual R-88 Points on DTM Layer Job View DTM Points…. The Points on DTM Layer screen displays all the points on the DTM lay

Job Menu R-89 3D View Job View DTM 3D View…. The 3D View screen is used to view the DTM from any angle. Settings : opens the 3D View Settings s

Survey Pro Reference Manual R-90 3D View Settings Job View DTM 3D View… Settings. The 3D View Settings screen is used to configure the informa

Job Menu R-91 Datum: When the Display the Difference checkbox is unchecked, cut and fill volumes will be computed in the 3D View screen based on the