Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual Instrukcja Użytkownika Pobierz pdf (Strona 228)

100

101

User’s Manual – Leveling Mode

218

7. You can optionally tap Check H. Dist to verify the

instrument is centered between the two rods.

The distance to Point B will be measured and

compared to the horizontal distances previously

measured to Point A and a come/go distance will

be provided so the rod at Point B can be moved to

equal the horizontal distance to Point A prior to

taking the shots that will be used to compute the

error.

8. Tap Take Shot. The Leveling Shots

screen will

open again and prompt you to take the required

shots to the rod over Point B. Once completed,

the Peg Test screen will open with a new graphic

showing the next setup.

9. Move the instrument as close as possible to the

rod over Point A where a shot can still be taken

to it. This is typically about 3 meters (10 feet)

from the rod.

10. Tap Take Shot. The Leveling Shots

screen will

open again where you can take the required

shots to Point A from the new setup.

11. Once complete, turn to Pont B and take the

required shots to that point.

1 2 ... 223 224 225 226 227 228 229 230 231 232 233 ... 366 367

Komentarze do niniejszej Instrukcji

Brak uwag

Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual Instrukcja Użytkownika Strona 228

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Spectra-precision Survey Pro v4.6 Recon and Nomad User Manual