Spectra-precision Survey Pro v4.5 Recon and Nomad Reference Manual Instrukcja Użytkownika Pobierz pdf (Strona 315)

100

101

Stakeout Menu

R-307

Stake Spiral and Offset – Screen Two

Station to Stake: is the desired station on the spiral

curve that you want to stake.

Station Interval: is the value that is added to the Station

to Stake after the Next Sta button is pressed.

Next Sta : advances the Station to Stake by the Station

Interval.

Offset: is the horizontal distance of the offset from the

spiral curve. The offset occurs on the left (while viewing

the spiral from the Start Point) when the

L is selected or

on the right when

R is selected.

Note: An offset of zero would result in the spiral curve

itself being staked.

V. Offset : will result in the elevations for the design points to be

adjusted by the value entered here and will change the cut / fill

values accordingly. Design elevations will be lower when is selected,

and higher when

U is selected.

Grade : specifies a slope from the spiral curve to the curve that is

being staked. When this is a non-zero value, the elevation for the

staked points will increasingly differ from the corresponding design

elevations on the spiral curve as the Offset value increases.

Height of rod: is the length of the rod.

Backsight… : accesses the Backsight Setup screen (Page R-114).

< Back : returns to the previous screen.

Solve> : accesses the third screen, described next.

Note: A motorized total station will automatically turn toward the

design point after pressing Solve> depending on the configuration of

the Stakeout Settings screen (Page R-45).

1 2 ... 310 311 312 313 314 315 316 317 318 319 320 ... 468 469

Komentarze do niniejszej Instrukcji

Brak uwag

Spectra-precision Survey Pro v4.5 Recon and Nomad Reference Manual Instrukcja Użytkownika Strona 315

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Spectra-precision Survey Pro v4.5 Recon and Nomad Reference Manual