Spectra-precision Survey Pro v3.80 Recon GPS User Manual Instrukcja Użytkownika Pobierz pdf (Strona 83)

Trouble Shooting

•

Tap to configure the base station. Since the Localization

adjustment is already solved, you will not be prompted to

solve the projection again.

10.

Check points and add control point.

•

Go to Control Points

. Select point

and tap .

Since you have not yet set the rover, tap at the

prompt, then retap . The results should be

perfect.

•

Add Control Point

. Deselect the

check when you are

collecting it. This point will be used only if necessary.

11.

Move the base to a point in the coordinate file not measured with

GPS.

•

Go to Base Setup

, select point

and tap . Since this

point does not have geodetic coordinates, you are prompted to

compute coordinates from the known (N,E,Elev) and the

latest projection solution. Tap

Note: This action is equivalent to the TDS “Move Base” routine in the

DOS software.

•

The geodetic coordinates for point

are computed. Tap

to configure the receiver.

12.

Set the Rover.

13.

Check points.

•

Go to Control Points

. Select point 2 and tap Check Point.

The results should be perfect.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 94 95

Komentarze do niniejszej Instrukcji

Brak uwag

Spectra-precision Survey Pro v3.80 Recon GPS User Manual Instrukcja Użytkownika Strona 83

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Spectra-precision Survey Pro v3.80 Recon GPS User Manual