Spectra-precision Survey Pro 3.80 Recon GPS Reference Manual Instrukcja Użytkownika Pobierz pdf (Strona 76)

GPS Reference Manual

Data Collection

The Data Collection menu opens the Receiver Session screen. The

Receiver Session

screen is also opened after receiver recording is

started or from other locations if you are doing simultaneous RTK

and post processing data collection.

Receiver Session Screen

-or-

The Receiver Session screen is used to enter the station information

for a post processing data collection session.

Store point in

: is used to select how to store this session.

You will always get a session recorded on the receiver’s

internal file. Select

Receiver and job file

to store a point

record in the Survey Pro .JOB file as well. By default,

post processing points will go on the layer selected in the

Job

| Settings | Post Process card.

Point (or) Site ID

: is where you enter the station name

for the next static session or stop and go point.

Note: If you are storing this point in Survey Pro, the

screen will look like the picture above, and you can pick

points using the Survey Pro compound point control. If

you choose an existing point, you will be prompted to

rename or over write, just like RTK data collection. If

you are storing this point in the receiver file only, then

the point control is replaced with a simple edit box titled Site ID. You

can pick an existing point name when storing to the receiver only.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 98 99

Brak uwag

Spectra-precision Survey Pro 3.80 Recon GPS Reference Manual Instrukcja Użytkownika Strona 76